The Aquatic and Aquatic 2 are both usa designed to clean water for spa, hot tub, bath tub, whirlpool and so on. The mini size model is wall mounted, very convenient.



How BWT Spa ozone generator works?

BWT Ozone Generators produce ozone gas which is introduced to spa water through suction created by the spa injector. Tubing is used to connect the ozone generator to an injector. The injector acts similarly to a vacuum, and pulls the ozone gas out of the aquatic/aquatic 2 and into the water.

Venturi Injector method:

BWT Ozone also manufactures our own venturi injectors ranging in size from 1/4 inch, 1/2 inch, 3/4 inch, 1 inch, 1.5 inch and 2 inch in a diameter. You will need to choose the correct size venturi for your hot tub to plumb into. Injector are sold separately.

Quickly installation and start up!

The Aquatic/Aquatic 2 is pre-assembled and ready to install. User manual, check valve, 5 feet of tubing, four hose ties and two screws and plastic anchor for mounting are all included in the package.

Aquatic/Aquatic 2 features a universal plug-type.

The models features a universal plug-type meaning that it can be wired one way for 110v and another for 240v. The user manual provides a complete wiring diagram and Instructions.

Enjoy crystal clear water with easy maintenance.

BWT Ozone recommends running the model on a 6hr/day ozone cycle in accordance to your hot tub pump timer. The following table shows anticipated longevity of the model in accordance to daily run-times: 2hr/day=3 years, 3hr/day= 2 years, 6hr/day=1 year. Individual pump times may vary according to use preference.



Details Images


Product Review on Ebay